Shopping Cart

No products in the cart.

X-PROG 3 Advanced Immobilizer & Key Programmer Compatible with Topdon Phoenix Pro/Plus & X-431 Series Diagnostic Scanner

£525.00 +VAT

4 in stock

Product Description

1. X-Prog 3 is a powerful chip reading device that can read/write keys to the vehicle.
2. X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
3. Compatible with X-431 series diagnostic scanners, such as the X431 V, X431 V+, X431 Pad V, X431 Pad VII & Topdon Phoenix Pro/Plus

X-PROG 3 Advanced Immobilizer & Key Programmer

 

Highlights

1. All-in-One Key Programmer. Integrates Multiple Function Models
2. X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/ FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code
3. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell
4. Compatible with X-431 series diagnostic scanners, Compatible with: 
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII & Topdon Phoenix Pro/Plus
5. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated
6. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
XPROG3 Advantages
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/ 0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).

Description:

X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicles. Additionally, the X-PROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X-431 V, X-431 V+, X-431 Pad V, and more models.

Core Functions
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).
Supported ECU MCU List:
Support more than 1000 models, and keep updating…

AtmelNSC
FujitsuPhilips
InfineonRenesas M16
MC68HC05Renesas M32
MC68HC08Renesas M32R
MC68HC11Renesas R32C
MC68HC12Renesas R8C
MediaTekRenesas V850 SPI
MicroChipRenesas V850 UART
NordicSamsung
STSiLabs

Support EEPROM List:
Support more than 1000 models, and keep updating…

4WireGINumonyxSST
AdestoGigaDeviceOKIST
AKMGrundigON SemiToshiba
AlteraHOLTEKOtherWinbond
AmicHynixPCTXicor
AtmelI2CPhilipsxUSSR
BOSCHITTPioneerYMC
CatalystKHICPMCSpansion
ChingisMacronixRamtronSPI
Dallas/MaximMicroChipRohmNEC
EONMicronSamsungNSC
ESMTMicroWireSeikoFord
EXELMitsubishiSiemensFujitsu
FairchildMotorolaSony

X-Prog vs X-Prog 3

Item NameX-progX-Prog 3
EEPROM Read and Write×
MCU Read and Write×
Mercedes Benz Key×
Key Simulator×
VW 4th instrument disassembly/reading/all lost×
Read Engine via Bench Mode×
Read Engine via Boot Mode×
VW 4th All Key Lost without Account×
Read Gearbox×
Read and Write Key
Read BMW ISN×
Read CAS4+/FEM Chip×
Audi 5th generation steering column chip reading and writing×
Replace OBD Reading Component

XPROG3 Operation Connection:

Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.

XPROG3 Specification

InterfaceDB26, DB15
Input PowerDC12V
Working CurrentMax500mA
Power Consumption5W
Storage Temperature-20℃~70℃
Working Temperature0℃~50℃
Size228*120 mm