Shopping Cart

No products in the cart.

DYNOSTAR RC3300 MK2

DYNOSTAR RC3300 MK2

£0.00 +VAT

Guaranteed Safe Checkout

THE ULTIMATE 2WD DYNO FOR PROFESSIONALS
The Dynostar RC3300 is the ultimate dynamometer for professionals involved in diagnosis and tuning on a daily basis. This model is a complete, maintenance-free, advanced roller chassis dynamometer which can handle power up to 950 kW and thanks to the powerful retarder, the dynamometer can be used to test cars with power up to 619 kW (with eddy current brake). For more power we advise the Dynostar Model RC6600. This Model is fitted with a second 3300Nm eddy current brake which virtually doubles the capacity of the dynamometer to around 1237 kW.
To guarantee optimum grip the rollers will be grooved as standard and also can optionally be treated with a tungsten carbide coating.
The Dynostar Model RC3300 and Model RC6600 are equipped with various handy features such as integrated pneumatic unloading aid. This system ensures that vehicles can drive on and off easily. The advanced system raises the vehicle for unloading and blocks the rollers. In addition, the rollers are positioned low in the dynamometer so even vehicles with an extreme low ground clearance can be tested easily. The Dynostar Model RC3300 and Model RC6600 can be integrated in your workshop floor but also operate perfect whenever it’s not placed into a pit.
Standard hardware features:
DAS Data Acquisition System
Advanced Dyno Station Software package
Junction Box
Calibration weight
Remote controller
Instructions and manual
CE marking
Emergency brake
Pneumatic lift device for loading and unloading the car
Straps and floor anchors for immobilizing the car
Standard software features:
Static power measurement
Dynamic power measurement: Roll on, Negative test, All gear, Variable transmission,
Fast acceleration, Multiple speed
Acceleration test
Speedometer test
Weather station
Power correction to DIN, EEC and SAE standard
Automatic braking after completing a dynamic test
Real time display of engine speed, power, traction and vehicle speed in software
Simulation of roller and air resistances for simulating situations on the road
Automatic calculation of losses in the drive line and calculation of power at
crankshaft
DYNOSTAR RC3300
Weight: 1550 [kg] 3417 [lbs]
Dimensions (lxwxh): 3,00 x 1,3 x 0,74 [m] 118 x 51x 29 [inch]
Power requirements: 230 [V]
Recorded current max.: 22 [A]
Air requirements: 6 [bar]
Max. speed: 250 [kmh] 155 [mph]
Drum width: 0,7 [m] 27,6 [inch]
Drum diameter: 0,4 [m] 15,7 [inch]
Number of drums: 4
Track width 2,09 [m] 82,2 [inch]
Min. track: 0,7 [m] 27,2 [inch]
Max. track: 2,09 [m] 82,2 [inch]
Max. axle load: 3500 [kg] 7700 [lbs]
Total inertia: 30,8 [kgm²]
Equivalent vehicle mass: 770 [kg] 1711 [lbs]
Max. dynamic power: 950 [kW] 1275 [hp]
Max. static power cold: 619 [kW] 830 [hp]
Max. static power continuous: 258 [kW] 346 [hp]
DYNOSTAR RC6600
Weight: 1950 [kg] 4299 [lbs]
Dimensions (lxwxh): 3 x 1,3 x 0,74 [m] 118 x 51x 29 [inch]
Power requirements: 230 [V]
Max. consumed current: 43 [A]
Air requirements: 6 [bar]
Max. speed: 250 [kmh] 155 [mph]
Drum width: 0,7 [m] 27,6 [inch]
Drum diameter: 0,4 [m] 15,7 [inch]
Number of drums: 4
Track width 2,09 [m] 82,2 [inch]
Min. track: 0,7 [m] 27,2 [inch]
Max. track: 2,09 [m] 82,2 [inch]
Max. vehicle mass: 3500 [kg] 7700 [lbs]
Total inertia: 34,6 [kgm²]
Equivalent vehicle mass: 865 [kg] 1907 [lbs]
Max. dynamic power: 1283 [kW] 1721 [hp]
Max. static power cold: 1238 [kW] 1659,7 [hp]
Max. static power continuous: 517 [kW] 693 [hp]